Dual vision temperature measurement thermal imaging dome camera TD30D
The product can be used for visible light and infrared thermal imaging dual light monitoring with accurate temperature measurement; in addition, it is equipped with a rotating PTZ to support 360° wide-area real-time monitoring; moreover, the built-in intelligent diagnosis and analysis algorithm can realize automatic early warning of abnormal temperature, invasion and cross-border, and protect the safety of equipment and places.
Specification
Thermal camera resolution | 320×240 |
Thermal camera response waveband | 8-14μm |
NETD | ≤50mK(@25℃,F#=1.0) |
Thermal camera FOV | 57°×44° |
Palette | There are 18 types, such as iron red, rainbow, white heat and black heat |
Visual camera sensor | 1/2.9-inch CMOS |
Visual camera resolution | 1920×1080 |
Illuminator | 30m infrared light |
Interface | one RJ45 10M/100M adaptive and one RS485 (optional) |
System alarm | support abnormal detection and linkage alarm of network cable disconnection, IP address conflict, memory full and memory error |
Network protocol | support ICMP, TCP, UDP, RTP, RTSP, DHCP, PPPOE, UPNP, DDNS, ONVIF and GB28181 |
Video compression standard | H264/H265 |
Temperature measurement range and precision | temperature measurement range: -10℃~+400℃; temperature measurement precision: ±2℃ or ±2% of reading (take the maximum value) |
Temperature measurement methods | support point temperature measurement, line temperature measurement, area temperature measurement and other temperature measurement methods |
Abnormal temperature alarm | higher than the highest temperature/lower than the lowest temperature/within/beyond |
PTZ | rotate continuously at 360° horizontally; vertical -10°~+90 |
Working environment | temperature is -40℃~+70℃; humidity is ≤95%, no condensation |
IP rating | IP66 |
Power supply | DC12V |
Power consumption | ≤30W (excluding heater and illuminator) |
Dimension | Φ144mm×242mm |
Weight | ≤2.5kg |